BOSTIK’S PRO-CURE is a PROfessional grade,
moisture-CURE urethane adhesive for wood flooring; this
adhesive does NOT contain any water. PRO-CURE may be
used to adhere all engineered, acrylic impregnated, solid
plank-flat milled, shorts, bamboo and parquet hardwood
flooring designed and recommended in writing by the
hardwood flooring manufacturer for glue-down applications.
This adhesive can also be used to install plywood as
described, as well as, ceramic tile, marble, and stone inlays
for light commercial and/or residential applications.
PRO-CURE may be used over all properly prepared
substrates common to hardwood flooring installations
including: concrete, plywood, particle or chip board
(underlayment grade), well bonded ceramic tile, cement
backer board, gypsum patch/underlayments (dry,
above-grade), cement patch/
1/8" x 1/8" x 1/8" Square Notch Finger Block Parquet Coverage: 70-80 ft2/ Gallon
3/16" x 5/32" V Notch ≤ 1/2” Engineered Hardwood Flooring Coverage: 45- 55 ft2/ Gallon
1/4" x 1/4" x 1/8" Square Notch > 1/2" Engineered, ≤ 1/2” Solid Hardwood
Flooring & 3/4" Parquet Coverage: 35-45 ft2/ Gallon
1/4" x 1/4" x 1/4" Square Notch > 1/2” Flat Milled Solid & Shorts or Plywood Coverage: 30-40 ft2/ Gallon
BOSTIK PRO-CURE 10 YEAR LIMITED SYSTEM
WARRANTY: LIMITED WARRANTY:
This is custom tab. You can add custom tab as an attribute for entire products, or for each categories. You can add CMS content such as sizing guide or videos to enhance product detail.